Open topic with navigation

Creating a BOM

To create a BOM

Open: Bill of Materials > Records > New Bill of Materials.

1. Select a stock code for the BOMA stock assembly and process costing system, which provides facilities to specify the structure of finished items in terms of sub-assemblies and components. from the Stock Item drop-down list. This code already exists in the Stock Control module. When you select the code, the description appears automatically in the Details section.

   Note: If you have selected the Allow creation of BOM for Components check box in the Bill of Material Settings General tab, the Stock Item drop-down list will show all stock items, including componentsRaw materials used to manufacture finished goods..

2. Enter the BOM details.
3. Enter the stock codes for the component parts or raw materialsThe base materials from which sub-assemblies, components and finished goods are made..
4. Enter details of the manufacturing operations needed. These may include machine processes, labour processes or both.
Note:
Some of the information that you can enter for an operation and use in the Bill of Materials module cannot be used in other Manufacturing modules.
If you want to use a BOM record in an estimate, be aware that:
• Estimating only supports one labour resource OR one machine resource per operation.

If you have an operation that uses two labour rates, for example, and you want to use the BOM in the Estimating module, create two operations for the BOM.

• Teardown resources are not used currently in the Estimating module.
• Only Machine setup costs are included in the Estimating module. Labour setup costs are not.
5. Enter any notes relating to the BOM.
6. Enter the attached files to open with a BOM.
7. Enter drawing references for the BOM.
8. View costing details relating to the BOM.
9. Add analysis codes for the BOM.

10. View the BOM history.

    Note: The History tab is visible if you select Keep BOM change history in the Bill of Material Settings General tab.

11. Save images with the BOM.

12. Save the BOM.

    Note: If you are using all Manufacturing modules, you have selected Perform Compatibility Checks in Manufacturing System Manager system settings Environment tab and you have compatibility issues, the Compatibility Warnings prompt appears.

Go to top