> Bill of Materials / BOM enquiries / Exploding BOMs

Exploding BOMs

To explode BOMs

Open: Bill of Materials > Enquiries > Explosion.

  1. Click Display.

    The selected BOMs are displayed in the list expanded to the default level or the level you have specified.

    The quantities will include the scrap percentage if you have selected to calculate scrap in Explosion on the BOM Settings Scrap tab.

    Note: If you are exploding a quantity of BOMs multiplied down through sub-assembly levels, the sub-assembly level will show the quantity plus the scrap percentage quantity, whilst the top components will only show the quantity.

  2. To work with the list:
  3. To print the data shown in the list, click Print.
  4. To close the window, click Close.

Go to top